LubanCat IoT N6 Pinout



CN3



CN4

Audio +

RaspiAudio enables your LubanCat ( Pi 3, 2, B+, A+, and Zero) with a state of the art audio DAC.

Great for home audio sound systems, an internet radio, or any project with audio.

Features

  1. DAC I2s 24-bit 96KHz audio with studio sampling quality

  2. Included dual RCA phono connector line out stereo (soldering required)

  3. Line out stereo jack 3.5mm

  4. Female header 2x20 (soldering required)

  5. Compatible with LubanCat 3, 2, B+, A+, and Zero

Installation for Raspbian users

  • Plug Audio+ firmly on top of your LubanCat GPIO and turn on your Pi

  • Make sure your audio jack is plugged in to your amplifier

  • Open a terminal and type:

sudo wget -O - script.raspiaudio.com | bash
  • Answer yes to reboot
  • If everything went fine you should hear a test sound when typing this command:
sudo speaker-test -l5 -c2 -t wav
  • NEW! : On the next reboot you will be able to control the volume from your desktop or by using the command-line tool alsamixer

Details

RASPIAUDIO AUDIO+