LubanCat IoT N6 Pinout



CN3



CN4

Zero2Go

Zero2Go is a Pi-Zero sized power supply that accepts DC 5~26V and output DC 5V/2.6A max. It allows you to turn on/off your Raspberry Pi (Zero or other models) with a single tap.

Zero2Go can connect to a Raspberry Pi Zero without soldering via pogo pins. It also supports other Raspberry Pi models with 40-pin header, including A+, B+, 2B, 3B.

You can use the two commands below to install software for Zero2Go:

wget http://www.uugear.com/repo/Zero2Go/installZero2Go.sh
sudo sh installZero2Go.sh

After the installation is done, reboot your Raspberry Pi and your Zero2Go is ready to go.

Details

Zero2Go