Speaker Bonnet

The Speaker Bonnet is a 3W stereo amplifier add-on for the Raspberry Pi. It uses I2S, so you get really crisp audio. The digital data goes right into the amplifier so there's no static like you hear from the headphone jack. It works with any and all Raspberry Pi computers with a 2x20 connector - A+, B+, Zero, Pi 2, Pi 3.

Once soldered just plug in any 4Ω to 8Ω speakers through the terminal blocks or Adafruit’s speaker set through the JST.

To install:

curl -sS https://raw.githubusercontent.com/adafruit/\
Raspberry-Pi-Installer-Scripts/master/i2samp.sh | bash

Details Made by Adafruit pHAT form-factor Needs 5v and 3v3 power Uses 3 GPIO pins More Information Schematic Buy Now