LubanCat IoT N6 Pinout



CN3



CN4

Audio+ Speaker+

2X5W STEREO AMP FOR ONBOARD/EXTERNAL SPEAKERS

  • Great for any portable radio project where you need built in speaker

  • Power your old speaker directly

  • No extra power supply required

Features:

(There is no microphone on this board, for a microphone see our other model MIC+)

  1. 2x5w Stereo Amplification 2 onboard speaker included

  2. DAC I2s 24-bit audio with studio sampling quality

  3. Line out stereo 3.5mm jack

  4. Onboard red button, 1 status led

  5. Extension screw terminal for external speakers (2 to 8 ohm)

  6. Extension screw terminal for external push button, external led.

  7. Soldered Long female header 2x20 (NO soldering required) Compatible with Raspberry Pi 3, 2, B+, A+, and Zero

Installation for Raspbian users

  • Plug Audio+ firmly on top of your Raspberry Pi GPIO and turn on your Pi

  • Open a terminal and type the following to download and run the installer:

sudo wget -O - script.raspiaudio.com | bash
  • Say yes TO the reboot

  • On the next reboot you have to run the test to finish the installation (it is an ALSA oddness):

sudo speaker-test -l5 -c2 -t wav
  • Reboot again and you will be able to control the volume from your desktop or by using the command-line tool alsamixer

Details

RASPIAUDIO AUDIO+ SPEAKERS+