Raspberry Pi NB-IoT Shield

It is a narrow band IoT (Nb-IoT) shield for Raspberry Pi. NB-IOT is very suitable for IoT applications with low power consumption. Shield also has the built-in 3-axis accelerometer, temperature, humidity, light sensors, opto-coupler, and relay. If you like, you can also add your own sensors using the built-in 4 channel ADC.

Also using the USB connector you can use the shield with Linux, Windows and Android.

Features

• LTE BC95 Nb-IoT Module B20 800MHz
• ADS1015 12 Bit 4 Channel ADC
• Relay with opto-coupler protection (24V DC, 120-220V AC Switching)
• Opto-coupler (3-12 V DC switching)- Built-in 3 axis accelerometer (MMA8452Q)
• Built-In HDC1080 temperature sensor (-40 +125 C)
• Built-In HDC1080 humidity sensor (0 100%)
• Built-In ALS-PT19 ambient light sensor()
• 1-Wire interface (3 male pins)(It can be used with DS18B20, DHT21 etc.)
• I2C interface (4 male pins)
• User button and LED
• Micro SIM Socket
• Built-in PCB Antenna
• UFL socket for external antenna

Warnings

! All data pins work with 3.3V reference. Any other voltage level should harm your shield or RPI.

Applications

• Smart farming sensor
• Smart cities sensor
• Smart home sensor
• Internet of Things (IoT) sensor
• Smart door lock
• Smart lightning
• Smart metering
• Bike sharing
• Smart parking
• Smart city
• Security and asset tracking
• Home appliances
• Agricultural and environmental monitoring

Details Made by Sixfab 40 pin header Needs 5v power Uses 11 GPIO pins Communication over I2C More Information GitHub Repository Buy Now