PaPiRus HAT

The PaPiRus HAT is a versatile ePaper display for the Raspberry Pi with screens ranging from 1.44" to 2.7" in size.

Unlike conventional displays, ePaper reflects light, and is capable of holding text and images indefinitely, even without electricity. The display does not require any power to keep the image and will stay 'on' without any power connection for many days before slowly fading. It's also daylight readable and is very high contrast.

Features

• Raspberry Pi HAT compliant design
• Interchangeable screen sizes (1.44", 2.0" or 2.7")
• 32MBit Flash Memory
• Battery Backed Real Time Clock (CR2032 battery included)
• Easy plug and play operation with on-board EEPROM
• Digital temperature sensor and thermal watchdog
• GPIO breakout connector and solder pads
• Optional reset pin header (for wake on alarm with RTC)
• 4 x optional slimline switches on top

To get the HAT set up and ready to go you can use the one-line product installer:

curl -sSL https://pisupp.ly/papiruscode | sudo bash

Details Made by Pi Supply HAT form-factor EEPROM product ID Needs 5v and 3v3 power Uses 19 GPIO pins Communication over SPI Communication over I2C 0x48: LM75BD 0x6F: MCP7940N More Information GitHub Repository Buy Now