LetsTrust-TPM

LetsTrust-TPM is a TPM2.0 daughter board for the Raspberry Pi platform based on an Infineon SLB9670 chip.

It is compatible with all Raspberry Pi models and probably the smallest available addon board on the market.

The TPM can be used e.g. as a secure keystore or as an hardware random number generator.

In order to use it your kernel must have the following options enabled:

  CONFIG_HW_RANDOM_TPM=m
  CONFIG_TCG_TPM=m
  CONFIG_TCG_TIS_CORE=m
  CONFIG_TCG_TIS_SPI=m
  CONFIG_SECURITYFS=y

and a suitable device tree overlay:

  slb9670: slb9670@0{
    compatible = "infineon,slb9670";
    reg = <1>;  /* CE1 */
    #address-cells = <1>;
    #size-cells = <0>;
    spi-max-frequency = <32000000>;
    status = "okay";
  };

Per default CE1 is used as chip select, CE0 can also be used by re-soldering a 0-ohm resistor.

A full dts overlay is available here, or you can also find a pre-compiled image with TPM support and the complete build-instructions at letstrust.de.

Details Made by pi3g 10 pin header Needs 3v3 power Uses 6 GPIO pins Communication over SPI More Information Schematic Buy Now