Inky pHAT

Inky pHAT is a low-energy, red/black, red/black/white or yellow/black/white electronic paper display for the Raspberry Pi. Multi-colour EPD displays, like the one on Inky pHAT, use ingenious electrophoresis to pull coloured particles up and down on the display. The coloured particles reflect light, unlike most display types, so they're visible under bright lights.

The unit comes fully-assembled, with the display securely stuck down to the Inky pHAT PCB and connected via a ribbon cable. The Inky pHAT is compatible with all 40-way Raspberry Pis.

To get the pHAT up and running, you can use the one-line product installer:

curl https://get.pimoroni.com/inky | bash

And follow the instructions!

Note: For the old first edition Inky pHAT you should use:

curl https://get.pimoroni.com/inkyphat | bash

Details Made by Pimoroni pHAT form-factor Needs 5v and 3v3 power Uses 8 GPIO pins Communication over SPI Communication over I2C 0x50: Inky ID EEPROM More Information GitHub Repository Buy Now