LubanCat IoT N6 Pinout



CN3



CN4

Coral Environmental Sensor Board

The Coral Environmental Sensor Board adds multiple environmental sensors and Grove connectors for external devices. It works with all 40-pin Raspberry Pi variants as well as the Coral Dev Board.

Features

  • 128x32 OLED Display (SSD1306-based SPI interface)
  • Ambient light sensor (OPT3002, 0x45 on i2c bus)
  • Barometric pressure sensor (BMP280, 0x76 on i2c bus)
  • Humidity / temperature sensor (HDC2010, 0x40 on i2c bus)
  • Crypto-processor with Google keys (ECC608, 0x30 on i2c bus)
  • Four Grove connectors:
    1x UART
    1x I2C
    1x PWM
    1x 3.3/5V analog (using TLA2022 ADC, 0x49 on i2c bus)
  • General purpose button
  • General purpose LED

Details

  • Made by Google
  • pHAT form-factor
  • EEPROM product ID
  • Needs 5v and 3v3 power
  • Uses 17 GPIO pins
  • Communication over SPI
  • Communication over I2C
  • 0x30: ECC608
  • 0x40: HDC2010
  • 0x45: OPT3002
  • 0x49: TLA2021
  • 0x76: BMP280
  • More Information
  • GitHub Repository
  • Buy Now
Coral Environmental Sensor Board